EDGE™ E3-X SSD - SATA 6Gb/s, 2.5"

Category: Solid State Drives

 

EDGE E3-X SSDs are TAA compliant, built with premium controllers, and backed by a three-year warranty and expert support.

       

The EDGE E3-X SSD is a high-performance SSD line designed for the storage enthusiast. Offering first-rate read, write, and IOPS speeds, the E3-X SSD provides impressive performance at a reasonable price. A Phison S10 controller and tier-1 MLC flash further ensures a quality product.

The E3-X is a direct replacement for traditional spinning disk hard drives. The result is a faster, lighter, more durable, and more reliable storage solution. In comparison to hard drives, the E3-X significantly improve system boot time, backup speeds, and software application loading.

A suite of reliability and durability features such as 256=bit AES hardware encryption, wear leveling, ECC, TRIM, and S.M.A.R.T.further enhance data efficiency and increase the lifespan of the drive. E3-X SSDs are TAA compliant and come backed by a 5-year warranty.*

*Visit www.EDGEMemory.com for complete warranty details

 

High Performance – A Phison S10 controller paired with quality tier-1 MLC NAND flash provides first-rate read, write and IOPS specs. Performance gains in file access, application loading, and more

Secure – 256-bit AES hardware encrypton (FDE), Secure Erase and End-to-End Data Path Protection keeps data safe

Durable - No moving parts - more durable and reliable than traditional hard drives that use a spinning disk

Low Power Consumption - Longer notebook battery life, more energy efficient, and runs cooler than hard drives

Dependable - Includes a suite of reliability and durability features to enhance data efficiency and to increase the lifespan of the drive: Wear leveling, SmartECC™, SmartFlush™, SmartRefresh™, TRIM, S.M.A.R.T. and more. Compatible with Windows, Linux, and Mac OS X environments

 

 

 SPECS:

Capacity:

2TB

Form Factor

2.5", 7mm height

Interface

SATA 6Gb/s (also compatible with SATA 1.5Gb/s and SATA 3Gb/s)

Dimensions

100mm (L) x 69.85mm (W) x 7mm (H)

Weight

0.12 lbs

Certifications

TAA, RoHS, FCC, CE, and WWN compliant

2TB Speed

Up to 565MB/s (read) / 500MB/s (write)

2GB IOPS

Up to 86,000 (read) / 89,000 (write)

Flash Type

MLC

Power Consumption (Typical)

0.255W (Active), 0.335W (Idle)

Write Endurance

3,000 P/E Cycles 

Wear Leveling Support

Improves the lifespan of the SSD by ensuring that data is written evenly across data blocks

SmartECC

Adds an extra layer of protection by recovering uncorrectable errors when standard ECC fails

End-to-End Data Path Protection

Enterprise level data protection that helps prevent corruption while data is written to flash

SmartFlush

Minimizes system memory utilization for user data, promoting a more efficient computing environment

SmartRefresh

Protects against read errors

Security

Supports 256-bit AES hardware encryption**and Secure Erase

Controller

Phison 3110-S10

Compatibility

Windows Vista and higher, Mac OS X 10.4 and higher, Linux

MTBF

1,500,000 hours

Operating Temperature

0°C - 70°C

Storage Temperature

-40°C - 85°C

Shock Resistance

1500G/0.5ms

Vibration Resistance

2–500Hz at 3.1G

DataRefresh

Ensures data integrity

TRIM Support

Prolongs SSD performance over time**

S.M.A.R.T. Support

Monitors and displays reports on SSD health and errors

Warranty

Three years or TBW^

Support

Toll-free tech support

 

 
*Some capacity used for formatting and not available for storage.  Capacities are 7% overprovisioned.
**Requires proper operating system support (i.e. Windows 7) 
^Visit www.EDGEMemory.com/warranty for complete warranty information

 

  

Available for purchase at these authorized resellers:

   

       

If you don't see your preferred reseller listed above, please click here for a complete list of authorized resellers.  If you need assistance, please call us at (800) 259-8989.

EDGE products are also available through leading distributors:

        

 

Spider FAQ

  • 1. What systems support EDGE SSDs?

    EDGE Boost SSDs are OS-independent and will run on any system supporting the corresponding SATA interface and form factor.  Please consult your system user manual to determine which form of Boost SSD is right for you.

  • 2. What hardware do I need to install the Boost Server SSD into my server?

    A manufacturer specific server tray is needed for most servers to install an SSD into it.  Please contact an EDGE Memory representative if you need a server tray with your Boost Server SSD.

  • 3. How do I format my EDGE SSD?

    The following instructions are designed for formatting as a secondary drive in Windows 7.  Other versions of Windows will be similar, but may vary.  If using a Mac, please access Utilities -> Disk Utility -> Partition to initiate a format.  If doing a clean install of the SSD (as a primary drive), please install and follow the instructions provided on the operating system install disc.

     

    1.  Right click on Computer (or My Computer) and select Manage.

     

    2.  Select Disk Management in the left pane.

     

    3.  You will receive an Initialize Disk prompt—this will only apply to any unformatted  

         devices you have installed (i.e. – the SSD).  Choose MBR, note the Disk number

         (ex Disk 1, Disk 2, etc) and select OK.

     

    4.  In the bottom pane of Disk Management, find the disk number from step 3.  Right-

         click on the unallocated box and select New Simple Volume.

     

    5.  The New Simple Volume/Partition wizard will appear.  Select Next on the first

         screen.

     

    6.  On the Specify Volume Size screen, ensure the Simple Volume size number

         matches the maximum disk space (default).  Select Next.

     

    7.  Assign a drive letter not already in use to the SSD.  Select Next.

     

    8.  Choose a file system format (NTFS recommended for Windows) with a default

         allocation unit size and give the SSD a Volume Label name.  Check perform a   

         quick format and uncheck enable file and folder compression.  Click Next.

     

    9.  Review the wizard summary and select Finish.  The SSD will be formatted.  Once

     

         complete, you can close Computer Management.

  • 4. Why does my SSD show less available capacity than advertised?

    In order to use any flash storage device, including SSDs, you must first format the device.  As a result of formatting, some storage capacity is unavailable for use (typically around 7%).  For example, a 240GB SSD will have roughly 223GB available for use after formatting.

  • 5. How do I enable the encryption function of my EDGE SSD?

    Not all systems support drive encryption (also called the ATA Security Password)—please consult your system’s user manual to ensure this feature is available.  Enabling this function varies from system to system, but the following is a typical example (IMPORTANT:  Your SSD will be permanently inaccessible if you forget or lose your password!):

     

    1.  After installing the SSD, access your computer’s BIOS during system startup.

     

    2.  Select the “Security” option.

     

    3.  Select the “Password” option.

     

    4.  Select the option displayed as “Hard Disk Password” or similar for the Boost SSD.

     

    5.  Create and reconfirm a password.  After complete, the encryption function is active. 

         You will need to input your password every time you start your computer to access

     

         the SSD. 

  • 6. Do SSDs require defragmenting like hard drives?

    No - SSDs never need to be defragmented.  In fact, defragmenting an SSD can reduce the lifespan.  If your system is set up to defragment automatically, you should disable or turn off defragmentation when using a Boost SSD.

  • 7. What is Wear-Leveling?

    One of the disadvantages to flash memory is that flash cells will eventually wear out.  To make sure EDGE Boost SSDs lives a long, productive life, wear-leveling ensures that data is written evenly to the drive.  This prevents any one cell or group of cells from being “over used” and wearing out prematurely.

  • 8. What is Durawrite?

    Durawrite extends the endurance of the flash inside EDGE Boost SSDs by better managing the way data is stored.

  • 9. What is TRIM?

    TRIM is like weight loss for your SSD.  TRIM helps your Boost SSD run more efficiently by removing old blocks of data that are no longer in use.  Without TRIM, an SSD does not know these blocks can be deleted, and the operating system has to “search” for available blocks to write data.  As this happens, SSD performance suffers and TRIM addresses this problem.  TRIM is a function of only newer operating systems, such as Windows 7 and 8.

  • 10. What is S.M.A.R.T.?

    Self Monitoring Analysis and Reporting Technology (S.M.A.R.T.) predicts and

    warns users of SSD failure. If the Boost SSD detects any critical errors, abnormal

    temperatures, etc., a message appears on screen, warning the user to take

     

    action to prevent potential data loss.

  • 11. What is MTBF?

    MTBF (Mean Time Between Failures) is the predicted time of operation before an SSD will fail. This is normally expressed in number of hours.

  • 12. How do I securely erase all data from my SSD?

    Please view the how-to guide on securely erasing an EDGE SSD of all data here.